If you have ever experienced flat tires, then you understand the frustration! At times, you may be lucky to get a flat tire when you are close to a repair station. However, if you are deep in the forest or far away from a repair station, it will be a difficult experience. Nevertheless, you shouldn’t worry since there are some simple steps you can take to be back on the road.
First, use the trucks emergency jack to support the corner that has a punctured tire. If you have the jack’s manual, it will offer you information on how to jack the truck safely without harming the body. Alternatively, identify points that allow you to jack the truck without damaging other underbody parts. Note that using the jack properly will prevent injuries and even damage. If you vehicle doesn’t have a jack, you can consider the Torin T83006 3 Ton SUV Service Jack.
Secondly, engage the tire iron to loosen and remove the wheel bolts or lugs. One of the best tire irons is the Ken-Tool 34647 HD Truck Tire Iron.To do that, turn the bolts/lugs counter-clockwise. Make sure the tire and wheel have enough clearance. Once you remove the wheel fasteners, use your hands to pull it (wheel) from the axle hub.
Next, you can use an emergency sealant to seal up the tire from inside. If you want to use a sealant, you will have to remove the tire using your jack. Also, you have to remove the Schrader valve core; this will allow you to insert the sealant. However, you should be careful if you choose to remove the valve, you may have to use a special screw. A sealant canister may require you to remove the valve to put the sealant, although it may not be the case always. To avoid messing up with your tire, first check the directions on how to use a particular sealant. You can check the Slime 10009 Tubeless Tire Sealant.
Evidently, some sealants come in a pressurized canister that can re-inflate the tire as you plug the puncture. If you choose to use a re-inflator, you don’t have to remove the valve core. After, plugging in the tire, you need to re-inflate the tire, and you will be back on the road.
Finally, you can use a radial tire plug kit to plug the puncture. Notably, most trucks are equipped with tubeless tires. You should remove the wheel to identify the puncture. You will require an air pump to that has a good fill nipple to re-inflate your tire in the process of identifying the puncture.
Plug kits come with three major components; a needle rasp or probe, an insertion tool, and adhesive tire plugs. These are the elements you need to plug your punctured tire. If you don’t have a kit, you can check the Slime 1034-A T-Handle Tire Plug Kit.
After locating the puncture, you should deflate the tire completely. To achieve this, simply press it down, you will be able to hear the escaping air. Also, you can use the insertion tool to help you achieve this process. If the object that caused the puncture is still in the tire, ensure you remove it before embarking on the steps below.
The next step involves plugging the puncture. Most of the kits come with a simple direction on how to plug the puncture so ensure you follow the directions. However, the process involves creating a channel through which the adhesive sticks can be inserted. Essentially, you should use the insertion tool to insert these sticky adhesives without enlarging the whole. Finally, re-inflate your tire and place it back into the truck. However, ensure you use a hand-pump to prevent the adhesive from coming out.
After sealing your tire, ensure you visit a specialist for a permanent solution, or you can decide to replace your truck tires with new ones.
How to avoid Punctures
Do you know that you can prevent your truck from getting punctures? There are simple steps that will ensure your tires are free from any puncture.
- Don’t over inflate your tires
- Also, don’t under-inflate the tires
- Avoid exceeding speed limits
- Don’t drive your truck in areas that don’t have clear roads.
- Avoid over-speeding in when driving on uneven roads.
Apart from the points listed above, ensure you always change your tires when they show signs of wear. Further, resist the temptation to use second-hand tires on your truck. When purchasing tires, ensure they are of high-quality and recommended for your truck.